KP001 pillow block bearing unit, 12 mm bore, set-screw lock, zinc alloy housing
ASAHI · kp
Use it
(import "parts/bearing-unit/KP001.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore | 12 |
| length | 71 |
| width | 16 |
| bolt-pitch | 56 |
| hole-diameter | 7 |
| hole-length | 7 |
Frame of reference
Origin at center of mounting base, z=0; shaft +y at z=H; mounting bolt line x.
All 47 numbers in its record
| h | 19 |
| l | 71 |
| a | 16 |
| j | 56 |
| n | 7 |
| h1 | 6 |
| h2 | 38 |
| b | 14.5 |
| s | 4 |
| a4 | 33 |
| a6 | 5 |
| cr | 5.1 |
| c0r | 2.4 |
| mass | 0.08 |
| d | 12, 28 |
| c | 8 |
| d4 | 17.4 |
| g | 3 |
| ds | 3 |
| screw-pitch | 0.35 |
| screw-angle | 120 |
| bore | 12 |
| length | 71 |
| width | 16 |
| bolt-pitch | 56 |
| hole-diameter | 7 |
| hole-length | 7 |
| insert-width | 14.5 |
| insert-offset | 4 |
| set-screw-diameter | 3 |
| set-screw-end-offset | 3 |
| insert-outer-radius | 14 |
| housing-color | 0.65, 0.67, 0.69 |
| shaft-height | 19, 19 |
| height | 38 |
| foot-thickness | 6 |
| boss-depth | 8 |
| collar-radius | 8.7 |
| shaft-axis-point | 0, 0, 19 |
| bolt-centers | -28, 0, 0, 28, 0, 0 |
| bolt-hole-count | 2 |
| outline-length | 71 |
| outline-width | 16 |
| set-screw-pitch-mm | 0.35 |
| basic-dynamic-radial-load-kn | 5.1 |
| basic-static-radial-load-kn | 2.4 |
| catalog-approx-mass-kg | 0.08 |