UCP204 pillow block bearing unit, 20 mm bore, set-screw lock, cast iron housing
NTN · ucp
Use it
(import "parts/bearing-unit/UCP204.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore | 20 |
| length | 127 |
| width | 38 |
| bolt-pitch | 95 |
| hole-diameter | 13 |
| hole-length | 16 |
Frame of reference
Origin at center of mounting base, z=0; shaft +y at z=H; mounting bolt line x.
All 49 numbers in its record
| h | 33.3 |
| l | 127 |
| j | 95 |
| a | 38 |
| n | 13 |
| n1 | 16 |
| h1 | 14 |
| h2 | 65 |
| l1 | 42 |
| b | 31 |
| s | 12.7 |
| cr | 14.2 |
| c0r | 6.65 |
| cu | 0.505 |
| mass | 0.7 |
| d | 20, 47 |
| c | 17 |
| d4 | 29.6 |
| g | 4.5 |
| ds | 5 |
| screw-pitch | 0.8 |
| screw-angle | 120 |
| bore | 20 |
| length | 127 |
| width | 38 |
| bolt-pitch | 95 |
| hole-diameter | 13 |
| hole-length | 16 |
| insert-width | 31 |
| insert-offset | 12.7 |
| set-screw-diameter | 5 |
| set-screw-end-offset | 4.5 |
| insert-outer-radius | 23.5 |
| housing-color | 0.13, 0.34, 0.25 |
| shaft-height | 33.3, 33.3 |
| height | 65 |
| foot-thickness | 14 |
| boss-depth | 17 |
| collar-radius | 14.8 |
| shaft-axis-point | 0, 0, 33.3 |
| bolt-centers | -47.5, 0, 0, 47.5, 0, 0 |
| bolt-hole-count | 2 |
| outline-length | 127 |
| outline-width | 38 |
| set-screw-pitch-mm | 0.8 |
| basic-dynamic-radial-load-kn | 14.2 |
| basic-static-radial-load-kn | 6.65 |
| fatigue-load-limit-kn | 0.505 |
| catalog-approx-mass-kg | 0.7 |