UCP205 pillow block bearing unit, 25 mm bore, set-screw lock, cast iron housing
NTN · ucp
Use it
(import "parts/bearing-unit/UCP205.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore | 25 |
| length | 140 |
| width | 38 |
| bolt-pitch | 105 |
| hole-diameter | 13 |
| hole-length | 16 |
Frame of reference
Origin at center of mounting base, z=0; shaft +y at z=H; mounting bolt line x.
All 49 numbers in its record
| h | 36.5 |
| l | 140 |
| j | 105 |
| a | 38 |
| n | 13 |
| n1 | 16 |
| h1 | 15 |
| h2 | 71 |
| l1 | 42 |
| b | 34.1 |
| s | 14.3 |
| cr | 15.5 |
| c0r | 7.85 |
| cu | 0.55 |
| mass | 0.8 |
| d | 25, 52 |
| c | 17 |
| d4 | 33.9 |
| g | 5 |
| ds | 5 |
| screw-pitch | 0.8 |
| screw-angle | 120 |
| bore | 25 |
| length | 140 |
| width | 38 |
| bolt-pitch | 105 |
| hole-diameter | 13 |
| hole-length | 16 |
| insert-width | 34.1 |
| insert-offset | 14.3 |
| set-screw-diameter | 5 |
| set-screw-end-offset | 5 |
| insert-outer-radius | 26 |
| housing-color | 0.13, 0.34, 0.25 |
| shaft-height | 36.5, 36.5 |
| height | 71 |
| foot-thickness | 15 |
| boss-depth | 17 |
| collar-radius | 16.95 |
| shaft-axis-point | 0, 0, 36.5 |
| bolt-centers | -52.5, 0, 0, 52.5, 0, 0 |
| bolt-hole-count | 2 |
| outline-length | 140 |
| outline-width | 38 |
| set-screw-pitch-mm | 0.8 |
| basic-dynamic-radial-load-kn | 15.5 |
| basic-static-radial-load-kn | 7.85 |
| fatigue-load-limit-kn | 0.55 |
| catalog-approx-mass-kg | 0.8 |