UCP209 pillow block bearing unit, 45 mm bore, set-screw lock, cast iron housing
NTN · ucp
Use it
(import "parts/bearing-unit/UCP209.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore | 45 |
| length | 190 |
| width | 54 |
| bolt-pitch | 146 |
| hole-diameter | 17 |
| hole-length | 20 |
Frame of reference
Origin at center of mounting base, z=0; shaft +y at z=H; mounting bolt line x.
All 49 numbers in its record
| h | 54 |
| l | 190 |
| j | 146 |
| a | 54 |
| n | 17 |
| n1 | 20 |
| h1 | 20 |
| h2 | 106 |
| l1 | 60 |
| b | 49.2 |
| s | 19 |
| cr | 36 |
| c0r | 20.4 |
| cu | 1.6 |
| mass | 2.2 |
| d | 45, 85 |
| c | 22 |
| d4 | 57.5 |
| g | 8 |
| ds | 8 |
| screw-pitch | 1 |
| screw-angle | 120 |
| bore | 45 |
| length | 190 |
| width | 54 |
| bolt-pitch | 146 |
| hole-diameter | 17 |
| hole-length | 20 |
| insert-width | 49.2 |
| insert-offset | 19 |
| set-screw-diameter | 8 |
| set-screw-end-offset | 8 |
| insert-outer-radius | 42.5 |
| housing-color | 0.13, 0.34, 0.25 |
| shaft-height | 54, 54 |
| height | 106 |
| foot-thickness | 20 |
| boss-depth | 22 |
| collar-radius | 28.75 |
| shaft-axis-point | 0, 0, 54 |
| bolt-centers | -73, 0, 0, 73, 0, 0 |
| bolt-hole-count | 2 |
| outline-length | 190 |
| outline-width | 54 |
| set-screw-pitch-mm | 1 |
| basic-dynamic-radial-load-kn | 36 |
| basic-static-radial-load-kn | 20.4 |
| fatigue-load-limit-kn | 1.6 |
| catalog-approx-mass-kg | 2.2 |