UCP210 pillow block bearing unit, 50 mm bore, set-screw lock, cast iron housing
NTN · ucp
Use it
(import "parts/bearing-unit/UCP210.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore | 50 |
| length | 206 |
| width | 60 |
| bolt-pitch | 159 |
| hole-diameter | 20 |
| hole-length | 23 |
Frame of reference
Origin at center of mounting base, z=0; shaft +y at z=H; mounting bolt line x.
All 49 numbers in its record
| h | 57.2 |
| l | 206 |
| j | 159 |
| a | 60 |
| n | 20 |
| n1 | 23 |
| h1 | 21 |
| h2 | 114 |
| l1 | 65 |
| b | 51.6 |
| s | 19 |
| cr | 39 |
| c0r | 23.2 |
| cu | 1.82 |
| mass | 2.7 |
| d | 50, 90 |
| c | 24 |
| d4 | 62.4 |
| g | 9 |
| ds | 8 |
| screw-pitch | 1 |
| screw-angle | 120 |
| bore | 50 |
| length | 206 |
| width | 60 |
| bolt-pitch | 159 |
| hole-diameter | 20 |
| hole-length | 23 |
| insert-width | 51.6 |
| insert-offset | 19 |
| set-screw-diameter | 8 |
| set-screw-end-offset | 9 |
| insert-outer-radius | 45 |
| housing-color | 0.13, 0.34, 0.25 |
| shaft-height | 57.2, 57.2 |
| height | 114 |
| foot-thickness | 21 |
| boss-depth | 24 |
| collar-radius | 31.2 |
| shaft-axis-point | 0, 0, 57.2 |
| bolt-centers | -79.5, 0, 0, 79.5, 0, 0 |
| bolt-hole-count | 2 |
| outline-length | 206 |
| outline-width | 60 |
| set-screw-pitch-mm | 1 |
| basic-dynamic-radial-load-kn | 39 |
| basic-static-radial-load-kn | 23.2 |
| fatigue-load-limit-kn | 1.82 |
| catalog-approx-mass-kg | 2.7 |