MR105ZZ deep-groove ball bearing, 5×10×4 mm, metal shielded
Kitanihon Seiki / EZO · deep-groove-bearing
Use it
(import "parts/bearing/MR105ZZ.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore-diameter | 5 |
| outer-diameter | 10 |
| width | 4 |
| chamfer-min | 0.15 |
| ball-count | 8 |
| ball-diameter | 1.2 |
Frame of reference
Origin at centre of width, bore on z axis; side-minus z=-B/2, side-plus z=+B/2; flange (if present) z=B/2-C1 .. B/2.
All 39 numbers in its record
| bore-diameter | 5 |
| outer-diameter | 10 |
| width | 4 |
| chamfer-min | 0.15 |
| ball-count | 8 |
| ball-diameter | 1.2 |
| ball-pitch-diameter | 7.5 |
| shoulder-offset | 0.39 |
| race-clearance | 0.03 |
| cage-clearance | 0.05 |
| closure-recess | 0.18 |
| closure-thickness | 0.15 |
| closure-inner-gap | 0.035 |
| closure-outer-overlap | 0.12 |
| closure-color | 0.59, 0.61, 0.64 |
| closure-metallic | 0.9 |
| closure-roughness | 0.34 |
| flange-diameter | 0 |
| flange-thickness | 0 |
| flange-edge-break | 0 |
| bore-mean-diameter-deviation-mm | -0.008, 0 |
| outer-mean-diameter-deviation-mm | -0.008, 0 |
| inner-and-outer-ring-width-deviation-mm | -0.12, 0 |
| chamfer-min-mm | 0.15 |
| dynamic-load-c-n | 432 |
| static-load-c0-n | 168 |
| limiting-speed-grease-rpm | 60000 |
| limiting-speed-oil-rpm | 71000 |
| mass-g | 1.23 |
| resolution-mm | 0.02 |
| nominal-boundary-proof-margin-mm | 0.001 |
| effective-density-g-per-mm3 | 0.007217772 |
| volume-mm3 | 170.4127 |
| shaft-abutment-da-min-mm | 5.9 |
| shaft-abutment-da-max-mm | 5.9 |
| housing-abutment-da-min-mm | 8.5 |
| housing-abutment-da-max-mm | 8.8 |
| shaft-fillet-ra-max-mm | 0.15 |
| housing-fillet-ra-max-mm | 0.15 |