Synthetic test bearing from 608-2RS, 8.6×23×8 mm, not a vendor part
Use it
(import "parts/bearing/record-variants.ik" as p)
In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bore-diameter | 8.6 |
| outer-diameter | 23 |
| width | 8 |
| chamfer-min | 0.3 |
| ball-count | 7 |
| ball-diameter | 3.969 |
All 20 numbers in its record
| bore-diameter | 8.6, 8.6 |
| outer-diameter | 23, 23 |
| width | 8, 8 |
| chamfer-min | 0.3 |
| ball-count | 7 |
| ball-diameter | 3.969 |
| ball-pitch-diameter | 15 |
| shoulder-offset | 1.289925 |
| race-clearance | 0.03 |
| cage-clearance | 0.05 |
| closure-recess | 0.18 |
| closure-thickness | 0.25 |
| closure-inner-gap | 0.035 |
| closure-outer-overlap | 0.12 |
| closure-color | 0.035, 0.04, 0.045 |
| closure-metallic | 0 |
| closure-roughness | 0.65 |
| flange-diameter | 0 |
| flange-thickness | 0 |
| flange-edge-break | 0 |