T-MOTOR F60 Pro V (F60PROV-2207-1750KV) brushless outrunner motor, 2207.5 stator, 1750 KV, 5-inch FPV
T-MOTOR (T-HOBBY) · bldc-outrunner
Use it
(import "parts/bldc/F60PROV-2207-1750KV.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bell-diameter | 26.8 |
| bell-top-z | 19.4 |
| bell-bottom-z | 6.4 |
| cap-bottom-z | 15.1 |
| bell-wall | 0.95 |
| top-style | 0 |
Frame of reference
Mounting face (underside of the base lobes) at z=0; motor body and shaft along +z on the z axis; the four M3 holes on the x and y axes (drawing's base view: opposite holes 16 apart); leads leave at 225 degrees from +x, between two lobes.
All 96 numbers in its record
| bell-diameter | 26.8, 26.8 |
| bell-top-z | 19.4 |
| bell-bottom-z | 6.4 |
| cap-bottom-z | 15.1 |
| bell-wall | 0.95 |
| top-style | 0 |
| tendon-count | 7 |
| tendon-width | 1 |
| tendon-offset | 2.9 |
| tendon-depth | 1.8 |
| rim-width | 1.4 |
| hub-diameter | 7.6 |
| stator-diameter | 22 |
| stator-height | 7.5 |
| stator-bottom-z | 8.2 |
| stator-bore | 11 |
| stator-yoke-radius | 7 |
| slots | 12 |
| tooth-width | 2 |
| shoe-depth | 0.8 |
| slot-opening | 1.2 |
| coil-thickness | 0.85 |
| magnet-wire-diameter | 0.35 |
| poles | 14 |
| magnet-thickness | 1.2 |
| magnet-bottom-z | 7.9 |
| magnet-top-z | 16 |
| base-style | 0 |
| mount-pattern-x | 16 |
| mount-pattern-y | 16 |
| mount-thread-d | 3 |
| mount-thread-p | 0.5 |
| mount-hole-depth | 3 |
| lobe-radius | 3 |
| base-core-radius | 5.8 |
| base-plate-thickness | 2.1 |
| base-step-top-z | 4.4 |
| tube-diameter | 11.2 |
| tube-bottom-z | 0 |
| tube-top-z | 16 |
| bearing-od | 9 |
| bearing-width | 4 |
| bearing-z | 1.2, 11.9 |
| shaft-diameter | 4, 4 |
| shaft-bottom-z | 0.6 |
| shaft-tip-z | 31.7 |
| prop-style | 0 |
| prop-seat-diameter | 5, 5 |
| prop-seat-bottom-z | 17 |
| prop-thread-d | 5 |
| prop-thread-p | 0.8 |
| prop-thread-length | 7, 7 |
| shaft-bore | 2.4 |
| shaft-bore-depth | 6 |
| wire-exit-deg | 225 |
| wire-z | 4.2 |
| wire-od | 1.6 |
| sleeve-od | 3.6 |
| wire-r0 | 6.5 |
| wire-r1 | 17 |
| lead-stub | 6 |
| base-color | 0.3, 0.305, 0.32 |
| edge-color | 0.8, 0.81, 0.83 |
| edge-band-z0 | 1.8 |
| edge-band-z1 | 2.08 |
| sleeve-color | 0.1, 0.1, 0.11 |
| cap-color | 0.4, 0.41, 0.43 |
| stator-color | 0.22, 0.32, 0.26 |
| copper-color | 0.72, 0.33, 0.17 |
| race-color | 0.76, 0.77, 0.79 |
| shaft-color | 0.62, 0.62, 0.64 |
| bell-metallic | 0.7 |
| bell-roughness | 0.38 |
| base-metallic | 0.55 |
| screw-head-d | 3.6 |
| screw-head-h | 0.5 |
| screw-socket-af | 1.5 |
| shaft-tip-to-mount-face | 31.7 |
| shaft-tip-to-bell-top | 12.3 |
| mounting-pattern | 16, 16 |
| kv-rpm-per-volt | 1750 |
| idle-current-a-at-10v | 1 |
| test-voltage-v | 25.2 |
| peak-current-a | 40.5 |
| peak-current-duration-s | 10 |
| max-power-w | 1003 |
| max-power-duration-s | 10 |
| mass-g-including-cable | 34.3 |
| shaft-diameter-mm | 4 |
| kv | 1750, 1750, 1750, 1750, 1750 |
| voltage-v | 25.2, 25.2, 25.1, 25, 24.8 |
| throttle-percent | 20, 40, 60, 80, 100 |
| thrust-g | 227, 558.6, 910.7, 1403.4, 1882.5 |
| current-a | 2.1, 6.6, 13.7, 24.3, 40.5 |
| rpm | 11132, 16928, 21409, 26122, 30527 |
| power-w | 53.6, 165.2, 342.4, 606.9, 1002.8 |