T-MOTOR MN2212 V2.0 Navigator brushless outrunner motor, 920 KV, 22×13 mm stator, 4 mm shaft
T-MOTOR · bldc-outrunner
Use it
(import "parts/bldc/MN2212-V2-KV920.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| bell-diameter | 27.5 |
| bell-top-z | 26.5 |
| bell-bottom-z | 5.9 |
| cap-bottom-z | 21.2 |
| bell-wall | 1.15 |
| top-style | 1 |
Frame of reference
Mounting face (the base's underside) at z=0; motor body along +z, the shaft on the z axis, its front stub toward +z and a rear stub 2.6 below the face; the M2.5 holes on the axes, 16 apart along x and 19 apart along y; leads leave at 135 degrees from +x through the base's wire channel. The prop adapter is a separate body seated on the bell top.
All 116 numbers in its record
| bell-diameter | 27.5, 27.5 |
| bell-top-z | 26.5 |
| bell-bottom-z | 5.9 |
| cap-bottom-z | 21.2 |
| bell-wall | 1.15 |
| top-style | 1 |
| top-flat-diameter | 19.3 |
| cap-cone-z | 21.8 |
| cap-thickness | 1.4 |
| petal-count | 6 |
| spoke-width | 3 |
| petal-inner-radius | 6.5 |
| petal-round | 1.2 |
| hub-diameter | 9 |
| hub-bottom-z | 22 |
| top-hole-spacing | 12 |
| top-hole-d | 3 |
| top-hole-p | 0.5 |
| top-hole-boss | 2.6 |
| stator-diameter | 22 |
| stator-height | 13 |
| stator-bottom-z | 7.6 |
| stator-bore | 12 |
| stator-yoke-radius | 7.6 |
| slots | 9 |
| tooth-width | 3 |
| shoe-depth | 1 |
| slot-opening | 1.6 |
| coil-thickness | 1.3 |
| magnet-wire-diameter | 0.45 |
| poles | 12 |
| magnet-thickness | 1.3 |
| magnet-bottom-z | 7.2 |
| magnet-top-z | 21 |
| base-style | 1 |
| base-diameter | 27.5 |
| base-top-z | 5.3 |
| base-groove-z0 | 3.4 |
| base-groove-z1 | 4.5 |
| vent-radius | 8.4 |
| vent-width | 3.8 |
| vent-length | 7.5 |
| bearing-recess-diameter | 10.9 |
| bearing-recess-depth | 0.4 |
| mount-pattern-x | 16 |
| mount-pattern-y | 19 |
| mount-thread-d | 2.5 |
| mount-thread-p | 0.45 |
| mount-hole-depth | 4 |
| tube-diameter | 12.2 |
| tube-bottom-z | 0 |
| tube-top-z | 20.6 |
| bearing-od | 9 |
| bearing-width | 4 |
| bearing-z | 0.6, 16.4 |
| shaft-diameter | 4, 4 |
| shaft-bottom-z | -2.6 |
| shaft-tip-z | 30 |
| prop-style | 1 |
| wire-exit-deg | 135 |
| wire-z | 2.3 |
| wire-od | 1.7 |
| sleeve-od | 4.2 |
| wire-r0 | 10.5 |
| wire-r1 | 22 |
| lead-stub | 6 |
| base-color | 0.8, 0.81, 0.83 |
| edge-color | 0.88, 0.89, 0.9 |
| edge-band-z0 | 5 |
| edge-band-z1 | 5.28 |
| sleeve-color | 0.06, 0.06, 0.065 |
| cap-color | 0.76, 0.77, 0.79 |
| stator-color | 0.28, 0.28, 0.3 |
| copper-color | 0.72, 0.36, 0.18 |
| race-color | 0.78, 0.79, 0.8 |
| shaft-color | 0.8, 0.8, 0.82 |
| bell-metallic | 0.85 |
| bell-roughness | 0.28 |
| base-metallic | 0.45 |
| screw-head-d | 0 |
| screw-head-h | 0 |
| screw-socket-af | 0 |
| length | 24 |
| thread-and-stem-length | 18.5 |
| thread-length | 13 |
| thread-d | 5 |
| thread-p | 0.8 |
| stem-diameter | 5.7 |
| flange-diameter | 19 |
| bore-diameter | 4 |
| bore-depth | 4.5 |
| screw-holes | 2 |
| screw-hole-diameter | 3.2 |
| screw-hole-spacing | 12 |
| scallop-radius | 1.8 |
| scallop-centre-radius | 10.2 |
| shaft-tip-to-shaft-tip | 32.6 |
| front-stub | 3.5 |
| rear-stub | 2.6 |
| kv-rpm-per-volt | 920 |
| resistance-ohm | 0.142 |
| idle-current-a-at-10v | 0.5 |
| max-continuous-current-a | 15 |
| max-continuous-current-duration-s | 180 |
| max-power-w | 220 |
| max-power-duration-s | 180 |
| mass-g-without-cable | 54 |
| mass-g-including-cable | 65 |
| shaft-diameter-mm | 4 |
| kv | 920, 920, 920, 920, 920 |
| voltage-v | 11.1, 11.1, 11.1, 11.1, 11.1 |
| throttle-percent | 50, 65, 75, 85, 100 |
| thrust-g | 176, 289, 385, 475, 617 |
| current-a | 1.6, 3, 4.3, 5.8, 8.1 |
| rpm | 4400, 5500, 6400, 7000, 7800 |
| power-w | 17.76, 33.3, 47.73, 64.38, 89.91 |