STM32 Blue Pill (generic clone) development board, 53×23 mm
MPN STM32-Blue-Pill-Generic · catalog-dev-board
Use it
(import "parts/board/STM32-Blue-Pill-Generic.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| length | 53 |
| width | 23 |
| thickness | 1.6 |
| corner-radius | 0 |
All 42 numbers in its record
| length | 53, 7 |
| width | 23, 7 |
| thickness | 1.6 |
| corner-radius | 0 |
| x0 | 2.37, 2.37, -1, 20, 38, 49 |
| y0 | 10.16, -10.16, -3.75, -4.5, -6, -5.08 |
| count | 20, 20 |
| pitch | 2.54, 2.54, 0.5 |
| angle | 0, 0, 0, 0, 0, 0 |
| mode | 0, 0 |
| drill | 1, 1 |
| pad-radius | 0.85, 0.85 |
| pin-side | 0.64, 0.64 |
| housing-z0 | 1.52, 1.52 |
| housing-z1 | 4.1, 4.1 |
| pin-z0 | -2, -2 |
| pin-z1 | 10.1, 10.1 |
| x1 | 6.2, 29, 44, 55 |
| y1 | 3.75, 4.5, 1.5, 5.08 |
| z0 | 1.52, 1.63, 1.52, 1.52 |
| z1 | 4.5, 3.03, 9, 7 |
| color | 0.72, 0.74, 0.76, 0.055, 0.06, 0.065, 0.055, 0.06, 0.065, 0.055, 0.06, 0.065, 0.02, 0.32, 0.46 |
| metallic | 0.8, 0, 0, 0 |
| kind | 1, 15, 3, 0, 0 |
| wall | 0.25, 0.3, 0.3, 0.3 |
| mouth-width | 6.9, 1, 1, 1 |
| mouth-height | 1.85, 1, 1, 1 |
| mouth-z | 1.49, 1, 1, 1 |
| mouth-pitch | 8, 8, 8, 8 |
| mouth-round | 0, 0, 0, 0 |
| insert-color | 0.055, 0.06, 0.065, 0.055, 0.06, 0.065, 0.055, 0.06, 0.065, 0.055, 0.06, 0.065 |
| contact-count | 5, 0, 0, 0 |
| contact-pitch | 0.65, 0.5, 0.5, 0.5 |
| height | 1.4 |
| pins | 48 |
| span | 9 |
| side | 1 |
| height-above-pcb | 2.9 |
| overhang-x-minus | 1 |
| overhang-x-plus | 0 |
| overhang-y-minus | 0 |
| overhang-y-plus | 0 |