PJRC Teensy 4.1 development board, 60.96×17.78 mm
MPN Teensy-4.1 · catalog-dev-board
Use it
(import "parts/board/Teensy-4.1.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| length | 60.96 |
| width | 17.78 |
| thickness | 1.57 |
| corner-radius | 0 |
All 43 numbers in its record
| length | 60.96, 10 |
| width | 17.78, 10 |
| thickness | 1.57 |
| corner-radius | 0 |
| x0 | 1.27, 1.27, 46.99, -0.7, 10, 48 |
| y0 | 7.62, -7.62, -5.08, -4.03, -5, -5.7 |
| count | 24, 24, 5 |
| pitch | 2.54, 2.54, 2.54, 0.5 |
| angle | 0, 0, 90, 0, 0, 0 |
| mode | 0, 0, 0 |
| drill | 1, 1, 1 |
| pad-radius | 0.85, 0.85, 0.85 |
| pin-side | 0.64, 0.64, 0.64 |
| housing-z0 | 1.49, 1.49, 1.49 |
| housing-z1 | 4.07, 4.07, 4.07 |
| pin-z0 | -2, -2, -2 |
| pin-z1 | 10.07, 10.07, 10.07 |
| x1 | 4.3, 20, 60.96 |
| y1 | 4.03, 5, 5.7 |
| z0 | 1.49, 1.6, 1.49 |
| z1 | 4.64, 3.48, 4.07 |
| color | 0.72, 0.74, 0.76, 0.055, 0.06, 0.065, 0.72, 0.74, 0.76, 0.025, 0.32, 0.12 |
| metallic | 0.8, 0, 0.8 |
| kind | 1, 15, 2, 0 |
| wall | 0.25, 0.3, 0.3 |
| mouth-width | 6.9, 1, 1 |
| mouth-height | 1.85, 1, 1 |
| mouth-z | 1.575, 1, 1 |
| mouth-pitch | 8, 8, 8 |
| mouth-round | 0, 0, 0 |
| insert-color | 0.055, 0.06, 0.065, 0.055, 0.06, 0.065, 0.055, 0.06, 0.065 |
| contact-count | 5, 0, 0 |
| contact-pitch | 0.65, 0.5, 0.5 |
| height | 1.88 |
| pins | 0 |
| span | 0 |
| side | 1 |
| boundary | 4.64, -0.7 |
| height-above-pcb | 3.07 |
| overhang-x-minus | 0.7 |
| overhang-x-plus | 0 |
| overhang-y-minus | 0 |
| overhang-y-plus | 0 |