DIN 471-10 external circlip (retaining ring) for 10 mm shaft, 1 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-10.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 9.3 |
| thickness | 0.97 |
| back-width | 1.8 |
| lug-width | 3.3 |
| eccentricity | 0.54 |
| lug-x | 6.026076 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 10, 1, 9.3, 1.8, 9.6, 1.1 |
| min | 0.94, 8.94, 1.5, 9.49 |
| max | 1, 9.4, 3.3, 9.6 |
| deviation | -0.06, 0, -0.36, 0.1, -0.11, 0 |
| approx-mass-g | 0.34 |
| radial-depth | 0.2 |
| edge-margin-min | 0.6 |
| free-diameter | 9.3 |
| thickness | 0.97 |
| back-width | 1.8 |
| lug-width | 3.3 |
| eccentricity | 0.54 |
| lug-x | 6.026076 |
| lug-y | 1.8375 |
| lug-hole-diameter | 1.54 |
| gap-width | 0.375 |
| opening-slope | 0.1406388 |