DIN 471-11 external circlip (retaining ring) for 11 mm shaft, 1 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-11.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 10.2 |
| thickness | 0.97 |
| back-width | 1.8 |
| lug-width | 3.3 |
| eccentricity | 0.54 |
| lug-x | 6.495082 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 11, 1, 10.2, 1.8, 10.5, 1.1 |
| min | 0.94, 9.84, 1.5, 10.39 |
| max | 1, 10.3, 3.3, 10.5 |
| deviation | -0.06, 0, -0.36, 0.1, -0.11, 0 |
| approx-mass-g | 0.41 |
| radial-depth | 0.25 |
| edge-margin-min | 0.8 |
| free-diameter | 10.2 |
| thickness | 0.97 |
| back-width | 1.8 |
| lug-width | 3.3 |
| eccentricity | 0.54 |
| lug-x | 6.495082 |
| lug-y | 1.8375 |
| lug-hole-diameter | 1.54 |
| gap-width | 0.375 |
| opening-slope | 0.1304833 |