DIN 471-14 external circlip (retaining ring) for 14 mm shaft, 1 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-14.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 12.9 |
| thickness | 0.97 |
| back-width | 2.1 |
| lug-width | 3.5 |
| eccentricity | 0.63 |
| lug-x | 7.961695 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 14, 1, 12.9, 2.1, 13.4, 1.1 |
| min | 0.94, 12.54, 1.7, 13.29 |
| max | 1, 13, 3.5, 13.4 |
| deviation | -0.06, 0, -0.36, 0.1, -0.11, 0 |
| approx-mass-g | 0.64 |
| radial-depth | 0.3 |
| edge-margin-min | 0.9 |
| free-diameter | 12.9 |
| thickness | 0.97 |
| back-width | 2.1 |
| lug-width | 3.5 |
| eccentricity | 0.63 |
| lug-x | 7.961695 |
| lug-y | 1.9625 |
| lug-hole-diameter | 1.74 |
| gap-width | 0.425 |
| opening-slope | 0.1146113 |