DIN 471-17 external circlip (retaining ring) for 17 mm shaft, 1 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-17.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 15.7 |
| thickness | 0.97 |
| back-width | 2.3 |
| lug-width | 3.8 |
| eccentricity | 0.69 |
| lug-x | 9.518395 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 17, 1, 15.7, 2.3, 16.2, 1.1 |
| min | 0.94, 15.34, 1.7, 16.09 |
| max | 1, 15.8, 3.8, 16.2 |
| deviation | -0.06, 0, -0.36, 0.1, -0.11, 0 |
| approx-mass-g | 0.82 |
| radial-depth | 0.4 |
| edge-margin-min | 1.2 |
| free-diameter | 15.7 |
| thickness | 0.97 |
| back-width | 2.3 |
| lug-width | 3.8 |
| eccentricity | 0.69 |
| lug-x | 9.518395 |
| lug-y | 2.1125 |
| lug-hole-diameter | 1.74 |
| gap-width | 0.425 |
| opening-slope | 0.1021706 |