DIN 471-25 external circlip (retaining ring) for 25 mm shaft, 1.2 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-25.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 23.2 |
| thickness | 1.17 |
| back-width | 3 |
| lug-width | 4.4 |
| eccentricity | 0.9 |
| lug-x | 13.58078 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 25, 1.2, 23.2, 3, 23.9, 1.3 |
| min | 1.14, 22.78, 2, 23.69 |
| max | 1.2, 23.41, 4.4, 23.9 |
| deviation | -0.06, 0, -0.42, 0.21, -0.21, 0 |
| approx-mass-g | 1.9 |
| radial-depth | 0.55 |
| edge-margin-min | 1.7 |
| free-diameter | 23.2 |
| thickness | 1.17 |
| back-width | 3 |
| lug-width | 4.4 |
| eccentricity | 0.9 |
| lug-x | 13.58078 |
| lug-y | 2.45 |
| lug-hole-diameter | 2.04 |
| gap-width | 0.5 |
| opening-slope | 0.08320584 |