DIN 471-26 external circlip (retaining ring) for 26 mm shaft, 1.2 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-26.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 24.2 |
| thickness | 1.17 |
| back-width | 3.1 |
| lug-width | 4.5 |
| eccentricity | 0.93 |
| lug-x | 14.13055 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 26, 1.2, 24.2, 3.1, 24.9, 1.3 |
| min | 1.14, 23.78, 2, 24.69 |
| max | 1.2, 24.41, 4.5, 24.9 |
| deviation | -0.06, 0, -0.42, 0.21, -0.21, 0 |
| approx-mass-g | 1.96 |
| radial-depth | 0.55 |
| edge-margin-min | 1.7 |
| free-diameter | 24.2 |
| thickness | 1.17 |
| back-width | 3.1 |
| lug-width | 4.5 |
| eccentricity | 0.93 |
| lug-x | 14.13055 |
| lug-y | 2.5 |
| lug-hole-diameter | 2.04 |
| gap-width | 0.5 |
| opening-slope | 0.08138394 |