DIN 471-28 external circlip (retaining ring) for 28 mm shaft, 1.5 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-28.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 25.9 |
| thickness | 1.47 |
| back-width | 3.2 |
| lug-width | 4.7 |
| eccentricity | 0.96 |
| lug-x | 15.07747 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 28, 1.5, 25.9, 3.2, 26.6, 1.6 |
| min | 1.44, 25.48, 2, 26.39 |
| max | 1.5, 26.11, 4.7, 26.6 |
| deviation | -0.06, 0, -0.42, 0.21, -0.21, 0 |
| approx-mass-g | 2.92 |
| radial-depth | 0.7 |
| edge-margin-min | 2.1 |
| free-diameter | 25.9 |
| thickness | 1.47 |
| back-width | 3.2 |
| lug-width | 4.7 |
| eccentricity | 0.96 |
| lug-x | 15.07747 |
| lug-y | 2.6 |
| lug-hole-diameter | 2.04 |
| gap-width | 0.5 |
| opening-slope | 0.07892573 |