DIN 471-29 external circlip (retaining ring) for 29 mm shaft, 1.5 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-29.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 26.9 |
| thickness | 1.47 |
| back-width | 3.4 |
| lug-width | 4.8 |
| eccentricity | 1.02 |
| lug-x | 15.6269 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 29, 1.5, 26.9, 3.4, 27.6, 1.6 |
| min | 1.44, 26.48, 2, 27.39 |
| max | 1.5, 27.11, 4.8, 27.6 |
| deviation | -0.06, 0, -0.42, 0.21, -0.21, 0 |
| approx-mass-g | 3.2 |
| radial-depth | 0.7 |
| edge-margin-min | 2.1 |
| free-diameter | 26.9 |
| thickness | 1.47 |
| back-width | 3.4 |
| lug-width | 4.8 |
| eccentricity | 1.02 |
| lug-x | 15.6269 |
| lug-y | 2.65 |
| lug-hole-diameter | 2.04 |
| gap-width | 0.5 |
| opening-slope | 0.07743059 |