DIN 471-3 external circlip (retaining ring) for 3 mm shaft, 0.4 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-3.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 2.7 |
| thickness | 0.375 |
| back-width | 0.8 |
| lug-width | 1.9 |
| eccentricity | 0.24 |
| lug-x | 2.033316 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 3, 0.4, 2.7, 0.8, 2.8, 0.5 |
| min | 0.35, 2.55, 1, 2.76 |
| max | 0.4, 2.74, 1.9, 2.8 |
| deviation | -0.05, 0, -0.15, 0.04, -0.04, 0 |
| approx-mass-g | 0.017 |
| radial-depth | 0.1 |
| edge-margin-min | 0.3 |
| free-diameter | 2.7 |
| thickness | 0.375 |
| back-width | 0.8 |
| lug-width | 1.9 |
| eccentricity | 0.24 |
| lug-x | 2.033316 |
| lug-y | 1.075 |
| lug-hole-diameter | 1.04 |
| gap-width | 0.25 |
| opening-slope | 0.2483627 |