DIN 471-32 external circlip (retaining ring) for 32 mm shaft, 1.5 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-32.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 29.6 |
| thickness | 1.47 |
| back-width | 3.6 |
| lug-width | 5.2 |
| eccentricity | 1.08 |
| lug-x | 17.15451 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 32, 1.5, 29.6, 3.6, 30.3, 1.6 |
| min | 1.44, 29.18, 2.5, 30.05 |
| max | 1.5, 29.81, 5.2, 30.3 |
| deviation | -0.06, 0, -0.42, 0.21, -0.25, 0 |
| approx-mass-g | 3.54 |
| radial-depth | 0.85 |
| edge-margin-min | 2.6 |
| free-diameter | 29.6 |
| thickness | 1.47 |
| back-width | 3.6 |
| lug-width | 5.2 |
| eccentricity | 1.08 |
| lug-x | 17.15451 |
| lug-y | 2.9125 |
| lug-hole-diameter | 2.54 |
| gap-width | 0.625 |
| opening-slope | 0.07884222 |