DIN 471-36 external circlip (retaining ring) for 36 mm shaft, 1.75 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-36.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 33.2 |
| thickness | 1.72 |
| back-width | 4 |
| lug-width | 5.6 |
| eccentricity | 1.2 |
| lug-x | 19.14869 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 36, 1.75, 33.2, 4, 34, 1.85 |
| min | 1.69, 32.7, 2.5, 33.75 |
| max | 1.75, 33.45, 5.6, 34 |
| deviation | -0.06, 0, -0.5, 0.25, -0.25, 0 |
| approx-mass-g | 5 |
| radial-depth | 1 |
| edge-margin-min | 3 |
| free-diameter | 33.2 |
| thickness | 1.72 |
| back-width | 4 |
| lug-width | 5.6 |
| eccentricity | 1.2 |
| lug-x | 19.14869 |
| lug-y | 3.1125 |
| lug-hole-diameter | 2.54 |
| gap-width | 0.625 |
| opening-slope | 0.07480929 |