DIN 471-50 external circlip (retaining ring) for 50 mm shaft, 2 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-50.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 45.8 |
| thickness | 1.965 |
| back-width | 5.1 |
| lug-width | 6.9 |
| eccentricity | 1.53 |
| lug-x | 26.07999 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 50, 2, 45.8, 5.1, 47, 2.15 |
| min | 1.93, 44.9, 2.5, 46.75 |
| max | 2, 46.19, 6.9, 47 |
| deviation | -0.07, 0, -0.9, 0.39, -0.25, 0 |
| approx-mass-g | 10.2 |
| radial-depth | 1.5 |
| edge-margin-min | 4.5 |
| free-diameter | 45.8 |
| thickness | 1.965 |
| back-width | 5.1 |
| lug-width | 6.9 |
| eccentricity | 1.53 |
| lug-x | 26.07999 |
| lug-y | 3.7625 |
| lug-hole-diameter | 2.54 |
| gap-width | 0.625 |
| opening-slope | 0.06489649 |