DIN 471-7 external circlip (retaining ring) for 7 mm shaft, 0.8 mm thick
standard-defined representative, not a unique SKU · DIN471
Use it
(import "parts/circlip/DIN471-7.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 6.5 |
| thickness | 0.775 |
| back-width | 1.4 |
| lug-width | 3.1 |
| eccentricity | 0.42 |
| lug-x | 4.488875 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 7, 0.8, 6.5, 1.4, 6.7, 0.9 |
| min | 0.75, 6.32, 1.2, 6.64 |
| max | 0.8, 6.56, 3.1, 6.7 |
| deviation | -0.05, 0, -0.18, 0.06, -0.06, 0 |
| approx-mass-g | 0.121 |
| radial-depth | 0.15 |
| edge-margin-min | 0.5 |
| free-diameter | 6.5 |
| thickness | 0.775 |
| back-width | 1.4 |
| lug-width | 3.1 |
| eccentricity | 0.42 |
| lug-x | 4.488875 |
| lug-y | 1.7 |
| lug-hole-diameter | 1.24 |
| gap-width | 0.3 |
| opening-slope | 0.1715352 |