DIN 472-18 internal circlip (retaining ring) for 18 mm bore, 1 mm thick
standard-defined representative, not a unique SKU · DIN472
Use it
(import "parts/circlip/DIN472-18.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 19.5 |
| thickness | 0.97 |
| back-width | 2.2 |
| lug-width | 4.1 |
| eccentricity | 0.66 |
| lug-x | 7.348469 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 18, 1, 19.5, 2.2, 19, 1.1 |
| min | 0.94, 19.37, 2, 19 |
| max | 1, 19.92, 4.1, 19.13 |
| deviation | -0.06, 0, -0.13, 0.42, 0, 0.13 |
| approx-mass-g | 0.74 |
| radial-depth | 0.5 |
| edge-margin-min | 1.5 |
| free-diameter | 19.5 |
| thickness | 0.97 |
| back-width | 2.2 |
| lug-width | 4.1 |
| eccentricity | 0.66 |
| lug-x | 7.348469 |
| lug-y | 2.3 |
| lug-hole-diameter | 2.04 |
| gap-width | 0.5 |
| opening-slope | 0.1456086 |