DIN 472-34 internal circlip (retaining ring) for 34 mm bore, 1.5 mm thick
standard-defined representative, not a unique SKU · DIN472
Use it
(import "parts/circlip/DIN472-34.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 36.5 |
| thickness | 1.47 |
| back-width | 3.3 |
| lug-width | 5.4 |
| eccentricity | 0.99 |
| lug-x | 15.2554 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 34, 1.5, 36.5, 3.3, 35.7, 1.6 |
| min | 1.44, 36.25, 2.5, 35.7 |
| max | 1.5, 37, 5.4, 35.95 |
| deviation | -0.06, 0, -0.25, 0.5, 0, 0.25 |
| approx-mass-g | 3.2 |
| radial-depth | 0.85 |
| edge-margin-min | 2.6 |
| free-diameter | 36.5 |
| thickness | 1.47 |
| back-width | 3.3 |
| lug-width | 5.4 |
| eccentricity | 0.99 |
| lug-x | 15.2554 |
| lug-y | 3.0125 |
| lug-hole-diameter | 2.54 |
| gap-width | 0.625 |
| opening-slope | 0.09127913 |