DIN 472-38 internal circlip (retaining ring) for 38 mm bore, 1.5 mm thick
standard-defined representative, not a unique SKU · DIN472
Use it
(import "parts/circlip/DIN472-38.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 40.8 |
| thickness | 1.47 |
| back-width | 3.7 |
| lug-width | 5.5 |
| eccentricity | 1.11 |
| lug-x | 17.38228 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 38, 1.5, 40.8, 3.7, 40, 1.6 |
| min | 1.44, 40.55, 2.5, 40 |
| max | 1.5, 41.3, 5.5, 40.25 |
| deviation | -0.06, 0, -0.25, 0.5, 0, 0.25 |
| approx-mass-g | 3.9 |
| radial-depth | 1 |
| edge-margin-min | 3 |
| free-diameter | 40.8 |
| thickness | 1.47 |
| back-width | 3.7 |
| lug-width | 5.5 |
| eccentricity | 1.11 |
| lug-x | 17.38228 |
| lug-y | 3.0625 |
| lug-hole-diameter | 2.54 |
| gap-width | 0.625 |
| opening-slope | 0.08126092 |