DIN 472-42 internal circlip (retaining ring) for 42 mm bore, 1.75 mm thick
standard-defined representative, not a unique SKU · DIN472
Use it
(import "parts/circlip/DIN472-42.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 45.5 |
| thickness | 1.72 |
| back-width | 4.1 |
| lug-width | 5.9 |
| eccentricity | 1.23 |
| lug-x | 19.52936 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 42, 1.75, 45.5, 4.1, 44.5, 1.85 |
| min | 1.69, 45.11, 2.5, 44.5 |
| max | 1.75, 46.4, 5.9, 44.75 |
| deviation | -0.06, 0, -0.39, 0.9, 0, 0.25 |
| approx-mass-g | 5.4 |
| radial-depth | 1.25 |
| edge-margin-min | 3.8 |
| free-diameter | 45.5 |
| thickness | 1.72 |
| back-width | 4.1 |
| lug-width | 5.9 |
| eccentricity | 1.23 |
| lug-x | 19.52936 |
| lug-y | 3.2625 |
| lug-hole-diameter | 2.54 |
| gap-width | 0.625 |
| opening-slope | 0.07642338 |