DIN 472-45 internal circlip (retaining ring) for 45 mm bore, 1.75 mm thick
standard-defined representative, not a unique SKU · DIN472
Use it
(import "parts/circlip/DIN472-45.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 48.5 |
| thickness | 1.72 |
| back-width | 4.3 |
| lug-width | 6.2 |
| eccentricity | 1.29 |
| lug-x | 20.87289 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 45, 1.75, 48.5, 4.3, 47.5, 1.85 |
| min | 1.69, 48.11, 2.5, 47.5 |
| max | 1.75, 49.4, 6.2, 47.75 |
| deviation | -0.06, 0, -0.39, 0.9, 0, 0.25 |
| approx-mass-g | 6 |
| radial-depth | 1.25 |
| edge-margin-min | 3.8 |
| free-diameter | 48.5 |
| thickness | 1.72 |
| back-width | 4.3 |
| lug-width | 6.2 |
| eccentricity | 1.29 |
| lug-x | 20.87289 |
| lug-y | 3.4125 |
| lug-hole-diameter | 2.54 |
| gap-width | 0.625 |
| opening-slope | 0.07437879 |