DIN 472-47 internal circlip (retaining ring) for 47 mm bore, 1.75 mm thick
standard-defined representative, not a unique SKU · DIN472
Use it
(import "parts/circlip/DIN472-47.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 50.5 |
| thickness | 1.72 |
| back-width | 4.4 |
| lug-width | 6.4 |
| eccentricity | 1.32 |
| lug-x | 21.76844 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 47, 1.75, 50.5, 4.4, 49.5, 1.85 |
| min | 1.69, 50.04, 2.5, 49.5 |
| max | 1.75, 51.6, 6.4, 49.75 |
| deviation | -0.06, 0, -0.46, 1.1, 0, 0.25 |
| approx-mass-g | 6.1 |
| radial-depth | 1.25 |
| edge-margin-min | 3.8 |
| free-diameter | 50.5 |
| thickness | 1.72 |
| back-width | 4.4 |
| lug-width | 6.4 |
| eccentricity | 1.32 |
| lug-x | 21.76844 |
| lug-y | 3.5125 |
| lug-hole-diameter | 2.54 |
| gap-width | 0.625 |
| opening-slope | 0.07315638 |