DIN 472-9 internal circlip (retaining ring) for 9 mm bore, 0.8 mm thick
standard-defined representative, not a unique SKU · DIN472
Use it
(import "parts/circlip/DIN472-9.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| free-diameter | 9.8 |
| thickness | 0.775 |
| back-width | 1.3 |
| lug-width | 2.5 |
| eccentricity | 0.39 |
| lug-x | 3.381106 |
Frame of reference
axis +z, bottom face z=0, gap on +x; free d3 is ID (DIN471) / OD (DIN472)
All 17 numbers in its record
| nominal | 9, 0.8, 9.8, 1.3, 9.4, 0.9 |
| min | 0.75, 9.7, 1, 9.4 |
| max | 0.8, 10.16, 2.5, 9.49 |
| deviation | -0.05, 0, -0.1, 0.36, 0, 0.09 |
| approx-mass-g | 0.15 |
| radial-depth | 0.2 |
| edge-margin-min | 0.6 |
| free-diameter | 9.8 |
| thickness | 0.775 |
| back-width | 1.3 |
| lug-width | 2.5 |
| eccentricity | 0.39 |
| lug-x | 3.381106 |
| lug-y | 1.375 |
| lug-hole-diameter | 1.04 |
| gap-width | 0.25 |
| opening-slope | 0.1848508 |