DIN 6799-0.8 E-clip (retaining washer) for 1–1.4 mm shafts, 0.8 mm groove, 0.2 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-0.8.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 0.2 |
| throat-width | 0.58 |
| free-outer-diameter | 1.95 |
| cavity-radius | 0.6325 |
| finger-width | 0.261 |
| finger-overlap | 0.137 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 1, 0.18, 0.54, 0.76, 0.24 |
| max | 1.4, 0.22, 0.62, 0.8, 0.28 |
| nominal | 0.2, 0.58, 1.95, 0.8, 0.24 |
| deviation | -0.02, 0.02, -0.04, 0.04, -0.04, 0, 0, 0.04 |
| installation-clearance-diameter | 2.25 |
| shaft-end-chamfer-g-max | 0.3 |
| approx-mass-g | 0.003 |
| edge-margin-min | 0.4 |
| thickness | 0.2 |
| throat-width | 0.58 |
| free-outer-diameter | 1.95 |
| cavity-radius | 0.6325 |
| finger-width | 0.261 |
| finger-overlap | 0.137 |