DIN 6799-1.2 E-clip (retaining washer) for 1.4–2 mm shafts, 1.2 mm groove, 0.3 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-1.2.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 0.3 |
| throat-width | 1.01 |
| free-outer-diameter | 2.9 |
| cavity-radius | 0.9775 |
| finger-width | 0.4545 |
| finger-overlap | 0.189 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 1.4, 0.28, 0.97, 1.14, 0.34 |
| max | 2, 0.32, 1.05, 1.2, 0.38 |
| nominal | 0.3, 1.01, 2.9, 1.2, 0.34 |
| deviation | -0.02, 0.02, -0.04, 0.04, -0.06, 0, 0, 0.04 |
| installation-clearance-diameter | 3.25 |
| shaft-end-chamfer-g-max | 0.4 |
| approx-mass-g | 0.009 |
| edge-margin-min | 0.6 |
| thickness | 0.3 |
| throat-width | 1.01 |
| free-outer-diameter | 2.9 |
| cavity-radius | 0.9775 |
| finger-width | 0.4545 |
| finger-overlap | 0.189 |