DIN 6799-1.5 E-clip (retaining washer) for 2–2.5 mm shafts, 1.5 mm groove, 0.4 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-1.5.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 0.4 |
| throat-width | 1.28 |
| free-outer-diameter | 3.85 |
| cavity-radius | 1.2825 |
| finger-width | 0.576 |
| finger-overlap | 0.257 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 2, 0.38, 1.24, 1.44, 0.44 |
| max | 2.5, 0.42, 1.32, 1.5, 0.48 |
| nominal | 0.4, 1.28, 3.85, 1.5, 0.44 |
| deviation | -0.02, 0.02, -0.04, 0.04, -0.06, 0, 0, 0.04 |
| installation-clearance-diameter | 4.25 |
| shaft-end-chamfer-g-max | 0.6 |
| approx-mass-g | 0.021 |
| edge-margin-min | 0.8 |
| thickness | 0.4 |
| throat-width | 1.28 |
| free-outer-diameter | 3.85 |
| cavity-radius | 1.2825 |
| finger-width | 0.576 |
| finger-overlap | 0.257 |