DIN 6799-1.9 E-clip (retaining washer) for 2.5–3 mm shafts, 1.9 mm groove, 0.5 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-1.9.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 0.5 |
| throat-width | 1.61 |
| free-outer-diameter | 4.4 |
| cavity-radius | 1.5025 |
| finger-width | 0.7245 |
| finger-overlap | 0.279 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 2.5, 0.48, 1.57, 1.84, 0.54 |
| max | 3, 0.52, 1.65, 1.9, 0.59 |
| nominal | 0.5, 1.61, 4.4, 1.9, 0.54 |
| deviation | -0.02, 0.02, -0.04, 0.04, -0.06, 0, 0, 0.05 |
| installation-clearance-diameter | 4.8 |
| shaft-end-chamfer-g-max | 0.7 |
| approx-mass-g | 0.04 |
| edge-margin-min | 1 |
| thickness | 0.5 |
| throat-width | 1.61 |
| free-outer-diameter | 4.4 |
| cavity-radius | 1.5025 |
| finger-width | 0.7245 |
| finger-overlap | 0.279 |