DIN 6799-10 E-clip (retaining washer) for 11–15 mm shafts, 10 mm groove, 1.2 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-10.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 1.2 |
| throat-width | 8.32 |
| free-outer-diameter | 19.65 |
| cavity-radius | 6.9925 |
| finger-width | 3.744 |
| finger-overlap | 1.133 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 11, 1.17, 8.262, 9.91, 1.25 |
| max | 15, 1.23, 8.378, 10, 1.33 |
| nominal | 1.2, 8.32, 19.65, 10, 1.25 |
| deviation | -0.03, 0.03, -0.058, 0.058, -0.09, 0, 0, 0.08 |
| installation-clearance-diameter | 20.4 |
| shaft-end-chamfer-g-max | 1.8 |
| approx-mass-g | 1.25 |
| edge-margin-min | 2 |
| thickness | 1.2 |
| throat-width | 8.32 |
| free-outer-diameter | 19.65 |
| cavity-radius | 6.9925 |
| finger-width | 3.744 |
| finger-overlap | 1.133 |