DIN 6799-12 E-clip (retaining washer) for 13–18 mm shafts, 12 mm groove, 1.3 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-12.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 1.3 |
| throat-width | 10.45 |
| free-outer-diameter | 22.65 |
| cavity-radius | 8.275 |
| finger-width | 4.7025 |
| finger-overlap | 1.22 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 13, 1.27, 10.38, 11.89, 1.35 |
| max | 18, 1.33, 10.52, 12, 1.43 |
| nominal | 1.3, 10.45, 22.65, 12, 1.35 |
| deviation | -0.03, 0.03, -0.07, 0.07, -0.11, 0, 0, 0.08 |
| installation-clearance-diameter | 23.4 |
| shaft-end-chamfer-g-max | 1.9 |
| approx-mass-g | 1.63 |
| edge-margin-min | 2.5 |
| thickness | 1.3 |
| throat-width | 10.45 |
| free-outer-diameter | 22.65 |
| cavity-radius | 8.275 |
| finger-width | 4.7025 |
| finger-overlap | 1.22 |