DIN 6799-15 E-clip (retaining washer) for 16–24 mm shafts, 15 mm groove, 1.5 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-15.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 1.5 |
| throat-width | 12.61 |
| free-outer-diameter | 28.5 |
| cavity-radius | 10.2775 |
| finger-width | 5.6745 |
| finger-overlap | 1.589 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 16, 1.47, 12.54, 14.89, 1.55 |
| max | 24, 1.53, 12.68, 15, 1.63 |
| nominal | 1.5, 12.61, 28.5, 15, 1.55 |
| deviation | -0.03, 0.03, -0.07, 0.07, -0.11, 0, 0, 0.08 |
| installation-clearance-diameter | 29.4 |
| shaft-end-chamfer-g-max | 2.2 |
| approx-mass-g | 3.37 |
| edge-margin-min | 3 |
| thickness | 1.5 |
| throat-width | 12.61 |
| free-outer-diameter | 28.5 |
| cavity-radius | 10.2775 |
| finger-width | 5.6745 |
| finger-overlap | 1.589 |