DIN 6799-19 E-clip (retaining washer) for 20–31 mm shafts, 19 mm groove, 1.75 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-19.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 1.75 |
| throat-width | 15.92 |
| free-outer-diameter | 36.7 |
| cavity-radius | 13.155 |
| finger-width | 7.164 |
| finger-overlap | 2.078 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 20, 1.72, 15.85, 18.87, 1.8 |
| max | 31, 1.78, 15.99, 19, 1.88 |
| nominal | 1.75, 15.92, 36.7, 19, 1.8 |
| deviation | -0.03, 0.03, -0.07, 0.07, -0.13, 0, 0, 0.08 |
| installation-clearance-diameter | 37.6 |
| shaft-end-chamfer-g-max | 2.5 |
| approx-mass-g | 6.42 |
| edge-margin-min | 3.5 |
| thickness | 1.75 |
| throat-width | 15.92 |
| free-outer-diameter | 36.7 |
| cavity-radius | 13.155 |
| finger-width | 7.164 |
| finger-overlap | 2.078 |