DIN 6799-24 E-clip (retaining washer) for 25–38 mm shafts, 24 mm groove, 2 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-24.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 2 |
| throat-width | 21.88 |
| free-outer-diameter | 43.65 |
| cavity-radius | 16.3825 |
| finger-width | 9.846 |
| finger-overlap | 2.177 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 25, 1.97, 21.796, 23.87, 2.05 |
| max | 38, 2.03, 21.964, 24, 2.13 |
| nominal | 2, 21.88, 43.65, 24, 2.05 |
| deviation | -0.03, 0.03, -0.084, 0.084, -0.13, 0, 0, 0.08 |
| installation-clearance-diameter | 44.6 |
| shaft-end-chamfer-g-max | 3 |
| approx-mass-g | 8.55 |
| edge-margin-min | 4 |
| thickness | 2 |
| throat-width | 21.88 |
| free-outer-diameter | 43.65 |
| cavity-radius | 16.3825 |
| finger-width | 9.846 |
| finger-overlap | 2.177 |