DIN 6799-3.2 E-clip (retaining washer) for 4–5 mm shafts, 3.2 mm groove, 0.6 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-3.2.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 0.6 |
| throat-width | 2.7 |
| free-outer-diameter | 6.8 |
| cavity-radius | 2.375 |
| finger-width | 1.215 |
| finger-overlap | 0.41 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 4, 0.58, 2.66, 3.125, 0.64 |
| max | 5, 0.62, 2.74, 3.2, 0.69 |
| nominal | 0.6, 2.7, 6.8, 3.2, 0.64 |
| deviation | -0.02, 0.02, -0.04, 0.04, -0.075, 0, 0, 0.05 |
| installation-clearance-diameter | 7.3 |
| shaft-end-chamfer-g-max | 0.9 |
| approx-mass-g | 0.088 |
| edge-margin-min | 1 |
| thickness | 0.6 |
| throat-width | 2.7 |
| free-outer-diameter | 6.8 |
| cavity-radius | 2.375 |
| finger-width | 1.215 |
| finger-overlap | 0.41 |