DIN 6799-4 E-clip (retaining washer) for 5–7 mm shafts, 4 mm groove, 0.7 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-4.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 0.7 |
| throat-width | 3.34 |
| free-outer-diameter | 8.8 |
| cavity-radius | 3.035 |
| finger-width | 1.503 |
| finger-overlap | 0.546 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 5, 0.68, 3.292, 3.925, 0.74 |
| max | 7, 0.72, 3.388, 4, 0.79 |
| nominal | 0.7, 3.34, 8.8, 4, 0.74 |
| deviation | -0.02, 0.02, -0.048, 0.048, -0.075, 0, 0, 0.05 |
| installation-clearance-diameter | 9.3 |
| shaft-end-chamfer-g-max | 1 |
| approx-mass-g | 0.158 |
| edge-margin-min | 1.2 |
| thickness | 0.7 |
| throat-width | 3.34 |
| free-outer-diameter | 8.8 |
| cavity-radius | 3.035 |
| finger-width | 1.503 |
| finger-overlap | 0.546 |