DIN 6799-6 E-clip (retaining washer) for 7–9 mm shafts, 6 mm groove, 0.7 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-6.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 0.7 |
| throat-width | 5.26 |
| free-outer-diameter | 11.75 |
| cavity-radius | 4.2525 |
| finger-width | 2.367 |
| finger-overlap | 0.649 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 7, 0.68, 5.212, 5.925, 0.74 |
| max | 9, 0.72, 5.308, 6, 0.79 |
| nominal | 0.7, 5.26, 11.75, 6, 0.74 |
| deviation | -0.02, 0.02, -0.048, 0.048, -0.075, 0, 0, 0.05 |
| installation-clearance-diameter | 12.3 |
| shaft-end-chamfer-g-max | 1.1 |
| approx-mass-g | 0.255 |
| edge-margin-min | 1.2 |
| thickness | 0.7 |
| throat-width | 5.26 |
| free-outer-diameter | 11.75 |
| cavity-radius | 4.2525 |
| finger-width | 2.367 |
| finger-overlap | 0.649 |