DIN 6799-7 E-clip (retaining washer) for 8–11 mm shafts, 7 mm groove, 0.9 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-7.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 0.9 |
| throat-width | 5.84 |
| free-outer-diameter | 13.8 |
| cavity-radius | 4.91 |
| finger-width | 2.628 |
| finger-overlap | 0.796 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 8, 0.88, 5.792, 6.91, 0.94 |
| max | 11, 0.92, 5.888, 7, 0.99 |
| nominal | 0.9, 5.84, 13.8, 7, 0.94 |
| deviation | -0.02, 0.02, -0.048, 0.048, -0.09, 0, 0, 0.05 |
| installation-clearance-diameter | 14.3 |
| shaft-end-chamfer-g-max | 1.3 |
| approx-mass-g | 0.474 |
| edge-margin-min | 1.5 |
| thickness | 0.9 |
| throat-width | 5.84 |
| free-outer-diameter | 13.8 |
| cavity-radius | 4.91 |
| finger-width | 2.628 |
| finger-overlap | 0.796 |