DIN 6799-8 E-clip (retaining washer) for 9–12 mm shafts, 8 mm groove, 1 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-8.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 1 |
| throat-width | 6.52 |
| free-outer-diameter | 15.6 |
| cavity-radius | 5.53 |
| finger-width | 2.934 |
| finger-overlap | 0.908 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 9, 0.97, 6.462, 7.91, 1.05 |
| max | 12, 1.03, 6.578, 8, 1.13 |
| nominal | 1, 6.52, 15.6, 8, 1.05 |
| deviation | -0.03, 0.03, -0.058, 0.058, -0.09, 0, 0, 0.08 |
| installation-clearance-diameter | 16.3 |
| shaft-end-chamfer-g-max | 1.5 |
| approx-mass-g | 0.66 |
| edge-margin-min | 1.8 |
| thickness | 1 |
| throat-width | 6.52 |
| free-outer-diameter | 15.6 |
| cavity-radius | 5.53 |
| finger-width | 2.934 |
| finger-overlap | 0.908 |