DIN 6799-9 E-clip (retaining washer) for 10–14 mm shafts, 9 mm groove, 1.1 mm thick
standard-defined representative, not a unique SKU · DIN6799
Use it
(import "parts/circlip/DIN6799-9.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| thickness | 1.1 |
| throat-width | 7.63 |
| free-outer-diameter | 18.2 |
| cavity-radius | 6.4575 |
| finger-width | 3.4335 |
| finger-overlap | 1.057 |
Frame of reference
shaft axis +z, bottom face z=0, radial insertion opening +x; FREE uninstalled ring
All 14 numbers in its record
| min | 10, 1.07, 7.572, 8.91, 1.15 |
| max | 14, 1.13, 7.688, 9, 1.23 |
| nominal | 1.1, 7.63, 18.2, 9, 1.15 |
| deviation | -0.03, 0.03, -0.058, 0.058, -0.09, 0, 0, 0.08 |
| installation-clearance-diameter | 18.8 |
| shaft-end-chamfer-g-max | 1.61 |
| approx-mass-g | 1.09 |
| edge-margin-min | 2 |
| thickness | 1.1 |
| throat-width | 7.63 |
| free-outer-diameter | 18.2 |
| cavity-radius | 6.4575 |
| finger-width | 3.4335 |
| finger-overlap | 1.057 |