CL-6-F Ruland one-piece clamp shaft collar, 9.52 mm (3/8 in) bore, 22.22 mm OD, 8.71 mm wide
Ruland · collar-clamp
Use it
(import "parts/coupling/CL-6-F.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 22.225 |
| length | 8.7122 |
| bore | 9.525 |
| bore-b | 9.525 |
| hex-bore | 0 |
| screw-diameter | 3.5052 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 20 numbers in its record
| page | 4 |
| bore-range-mm | 9.525, 9.525 |
| stock-bores-mm | 9.525 |
| width-mm | -0.254, 0.0762 |
| outer-diameter | 22.225 |
| length | 8.7122 |
| bore | 9.525 |
| bore-b | 9.525 |
| hex-bore | 0 |
| screw-diameter | 3.5052 |
| split-gap | 0.8 |
| screw-end-offset | 1.568196 |
| screws-per-end | 1 |
| screw-location | 7.9502 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 8.7122 |
| screw-location-r-mm | 7.9502 |
| hardware-clearance-diameter-mm | 26.0858 |
| screw-count | 1 |