CL-9-F Ruland one-piece clamp shaft collar, 14.29 mm (9/16 in) bore, 31.75 mm OD, 11.1 mm wide
Ruland · collar-clamp
Use it
(import "parts/coupling/CL-9-F.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 31.75 |
| length | 11.0998 |
| bore | 14.2875 |
| bore-b | 14.2875 |
| hex-bore | 0 |
| screw-diameter | 4.826 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 20 numbers in its record
| page | 4 |
| bore-range-mm | 14.2875, 14.2875 |
| stock-bores-mm | 14.2875 |
| width-mm | -0.254, 0.0762 |
| outer-diameter | 31.75 |
| length | 11.0998 |
| bore | 14.2875 |
| bore-b | 14.2875 |
| hex-bore | 0 |
| screw-diameter | 4.826 |
| split-gap | 0.8 |
| screw-end-offset | 1.997964 |
| screws-per-end | 1 |
| screw-location | 11.3792 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 11.0998 |
| screw-location-r-mm | 11.3792 |
| hardware-clearance-diameter-mm | 36.7792 |
| screw-count | 1 |