GR19-A UNIISO plum jaw coupling, 6 mm to 19 mm bores, 41 mm OD, 66 mm long
UNIISO · plum
Use it
(import "parts/coupling/GR19-A.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 41 |
| length | 66 |
| bore | 6 |
| bore-b | 19 |
| hex-bore | 0 |
| screw-diameter | 5 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 27 numbers in its record
| bore-range-mm | 6, 19 |
| outer-diameter | 41 |
| length | 66 |
| bore | 6 |
| bore-b | 19 |
| hex-bore | 0 |
| screw-diameter | 5 |
| split-gap | 0.8 |
| screw-end-offset | 11.88 |
| screws-per-end | 1 |
| hub-length | 25 |
| hub-diameter | 32 |
| jaw-count | 3 |
| jaw-span | 30 |
| jaw-inner-radius | 14.35 |
| jaw-reach | 15.7 |
| spider-diameter | 40.4 |
| spider-width | 15.4 |
| spider-inner-diameter | 18 |
| insert-clearance | 0.15 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 66 |
| rated-torque-nm | 17 |
| max-speed-rpm | 16700 |
| screw-count | 2 |
| rated-torque-92-shore-a-nm | 10 |