GR24-A UNIISO plum jaw coupling, 9 mm to 24 mm bores, 56 mm OD, 78 mm long
UNIISO · plum
Use it
(import "parts/coupling/GR24-A.ik" as p)In a design on ink: ask your agent for it by name, or by what it must be.
Dimensions
| outer-diameter | 56 |
| length | 78 |
| bore | 9 |
| bore-b | 24 |
| hex-bore | 0 |
| screw-diameter | 6 |
Frame of reference
End A / lower bearing face z=0; axis +z; end B z=L; assembled hubs share this frame. Clamp split y=0; opening +x; hex flats normal x.
All 27 numbers in its record
| bore-range-mm | 9, 24 |
| outer-diameter | 56 |
| length | 78 |
| bore | 9 |
| bore-b | 24 |
| hex-bore | 0 |
| screw-diameter | 6 |
| split-gap | 0.8 |
| screw-end-offset | 14.04 |
| screws-per-end | 1 |
| hub-length | 30 |
| hub-diameter | 40 |
| jaw-count | 4 |
| jaw-span | 22.5 |
| jaw-inner-radius | 19.6 |
| jaw-reach | 17.7 |
| spider-diameter | 55.4 |
| spider-width | 17.4 |
| spider-inner-diameter | 27 |
| insert-clearance | 0.15 |
| axis | 0, 0, 1 |
| end-a-z | 0 |
| end-b-z | 78 |
| rated-torque-nm | 60 |
| max-speed-rpm | 12100 |
| screw-count | 2 |
| rated-torque-92-shore-a-nm | 35 |